Your Iridium GO! exec box contains the following items:

• Iridium GO! exec Device
• Protective Cover
• Documentation Box:
• Multilanguage Quick Start Guide
• User Manual
• IERCC Booklet
• Safety and Regulatory Card
• Accessories Box:
• AC Wall Charger with International Plug Kit
• DC Car Charger
• USB C Cable

Included Accessories and How to Use Them

AC Wall Charger:
The Iridium GO! exec comes with a 110-240v AC charger with USB-C output that allows the device to fully charge in under 3 hours. Connecting other AC chargers to the USB-C charging port may also work, but if the charger is lower power it will take longer to charge. The Iridium GO! exec will detect chargers under ~18W and will warn users that some features may not be supported.

Using the Supplied AC Charger:
Select the appropriate international adapter depending on your requirements.

• For the USA the pins just need to be folded out from the charger.
• For other countries the pins should be folded in and the appropriate adapter slid onto the folded pins until it clicks in.
• Then plug in one end of the supplied USB C cable to the wall charger and the other end to your device charging port.
  NOTE: The port’s IP65 rating isn’t maintained when the connector is inserted

DC Car Charger
The Iridium GO! exec is supplied with a DC car charger suitable for use in 2 pin cigarette lighter sockets supplying 12-24 v often used in automobile and marine environments. The DC charger will allow the device to fully charge in under 3 hours using the supplied USB-C cable. Connecting other DC chargers to the USB-C charging port will also work, but if the charger is lower power it will take longer to charge. The Iridium GO! exec will detect chargers under ~18W and will warn users that some features may not be supported.

Using the Supplied DC Charger

• Plug the DC charger into the automobile auxiliary power outlet. When the socket is powered, the DC charger will show a blue light.
• Connect one end of USB-C cable to the USB-C output on the supplied charger and connect the other end of the USB-C cable to your device charging port.
  NOTE: The port’s IP65 rating is not maintained when a connector is inserted. 23

Protective Cover:
This custom-built accessory snaps on easily to the top or bottom of the Iridium GO! exec for additional protection. The cover has openings on the side to allow for cords to be attached to the device with the cover either on top or the bottom.

• This cover can attach on the top of the device to help protect it from scratches etc. when being carried inside a bag with other items.
• When attached on the top of the device it will also help protect the unit from getting too hot if operated in direct sunlight.
  NOTE: When the cover is clipped to the top of the unit the power button and touchscreen cannot be accessed. Please use the antenna lift and lower actions to power on or off the unit. Additionally, the application can be used to perform critical tasks like answering/placing calls or powering the unit down.
• It can also snap on the backside/bottom to protect the device when placed on dirt, uneven surfaces, etc.

Iridium GO! exec™
Fixed Installation Kit

On Land

Whether you’re a remote worker, scientist, or adventure-seeker – connect wherever you go! Your Iridium GO! exec Fixed Installation Kit lets you mount your device on any building to extend the use of satellite communications indoors. In emergency situations, even if the local infrastructure has been compromised, humanitarian or aid workers can make high quality voice calls and use chat applications over the Iridium Certus® 100 midband service, featuring speeds of up to 22 Kbps transmit / 88 Kbps receive.

At Sea

When you need to stay connected at sea, the Iridium GO! exec Fixed Installation Kit is your solution. Using its external antenna, you and your passengers can stay updated on changing conditions, or connect with colleagues and loved ones via phone, chat apps, email, or social media – all from the comfort of the your personal vessel. Get more from your Iridium GO! exec with the Fixed Installation Kit – designed specifically for remote buildings or recreational boating.